EPCM / EPC

Adverio’s approach Engineering, Procurement & Construction Management (EPCM)
Adverio works in several phases with a clear starting and ending point for each phase. Each phase ends with a go-no go decision for the next phase. This helps to obtain a smooth design process and – ultimately – a well-engineered and good functioning facility. The total design and building of a typical AD facility takes normally between 9-14 months after signing the contract.
The project phases are: 1. feasibility study; 2. pre-engineering; 3. conceptual engineering; 4. basic engineering; 5. detailed engineering; 6. construction and commissioning phase:
  • Procurement: Management of contractors and supplier contracts on behalf of the client
  • Construction Management: on-site project management from “green light” to hand over of facility after commissioning
  From Design to Built Adverio calls on a broad Network of Expertise (NL and abroad) for:
  • Process engineering
  • Mechanical engineering
  • Electrical engineering
  • Instrumentation and control systems
  • Civil engineering
  • Cost engineering
  • Construction supervision
  • QHSE
  • Project management
 

EPCM Farmbased Biogas

Adverio’s project managers and engineers have built over 50 farm based digesters, ranging from 0,3 to 2,5 MW, for Heat and Power, in combination with biogas upgrading, or for fertiliser production in the Netherlands, UK, Ireland and Middle East. The waste problems of the client are eliminated and renewable energy is provide to the national grid and/or own consumption. Adverio’s and Dabar Engineers have completed 4 single permit applications of 1MW (agriculture) AD’s at Spain and are working to complete several others.

Adverio´s process has clear advantages over conventional systems

Our fermentation process has a shorter throughput time in the digester than conventional systems, so the digester can be smaller dimensioned, requiring lower investment and hence, a shorter ROI. In addition, the AWS process has higher gas yield than conventional systems and is able to ferment high lignin materials such as grass and wood, to enable even quicker ROI.

Our deliverables:

  • Design and Engineering
  • Feasibility Studies
  • Biological Testing
  • Permit Application
  • Procurement supervision Construction supervision Operational guidance
  • Start-up
AD farm based case study

In cooperation with:

  • Oosterhof Holman bioEnergy, Netherlands – for construction
  • Opure, Netherlands –  for biological services
  • Dabar Ingenieros, Spain
Please check our references or contact us for more information.  

EPCM Waste systems

waste systems (front page)
                  Adverio Waste Systems BV (AWS) is an independent company that offers global solutions for the (re) use and use of waste for recycling of raw materials and renewable energy generation. Sustainable solutions are tested against the hierarchy of ‘Lansink’s ladder” and are based on the search for the highest application of raw materials used in (re) use and for biofuels. AWS guarantees to develop solutions for civil and environmental in a sustainable, responsible, creative and based on the latest technological developments. We are specialised in the integration of waste and biogas projects at home and abroad. These projects are based on the “waste separation model” where from the raw material, household waste, several end (half) products are made and where different technologies are used. Over the past 10 years there has been gained a lot of knowledge and experience by the management team and partner companies of AWS in the development and realization of waste treatment and renewable energy projects.Through effective deployment of the skills and experience of the various partner companies, we act as the “coordinating partner”, offering effective solutions. Separation of organic waste from different waste streams. For every separation and recycling need we have the right technology.
  • Municipal Solid Waste (MSW)
  • Bio-waste (GFT)
  • Mixed waste
Energy recovery with our fermentation process. Our fermentation process has a shorter throughput time in the digester than conventional systems, so the digester can be smaller dimensioned, requiring lower investment and hence, a shorter ROI. In addition, the AWS process has higher gas yield than conventional systems and is able to ferment high lignin materials such as grass and wood, to enable even quicker ROI. Composting
  • Digestate from the fermentation process
  • Organic waste
Residue upgrading
  • Gasification
  • Pyrolysis
  • Small scale combustion

EPCM Technologies / Developments

Adverio is continuously developing, with multiple partner’s, new technologies and products. Connecting clients, partners and organisations through sharing ideas and opportunities. Projects which are being developed at the moment are:
  • Heat to Electricity – based on the concept of the heat engine.
  • Fibers to Board – based on the concept to make board from organic waste.
  • Waste to Value – based on the concept of utilising waste for re-use and energy.
  • Manure to Product – based on the concept to upgrade manure to a high grade biofertiliser.
  • Fibers to Biogas – based on the concept of digesting lignin (waste) materials.
Though having connection in multiple industries and our “out-of-the-box” approach, we can help your idea to be implemented.